You are here: FMS Internet > Products >Force sensors
Force Measuring Sensors (Load Cells) for Web Tension All FMS force measuring sensors are characterised by its highest overload protection and its designated accurancy. It's achieved by a mechanical hardstop and four foil-type strain gauges in a full wheatstone bridge configuration. The red point on the outside of the sensor indicates the positive measuring direction.
CA203 Force Measuring Sensor The CA203 series is made for dead shaft applications. FMS dual flexion beam technology sensors set new benchmarks with regards to precision, reliability and economic efficiency.
Features 10 times overload protection 20:1 force measuring range Nominal forces 50, 125, 250, 500, 1000, 1500 N Stainless steel sensor, Aluminum Cover
Advantages No re-calibration required Accuracy class 0.5% Covers a wide application range
C203 Force Measuring Sensor The dual flexion beam sensors of the C203 series set new benchmarks with regards to precision, reliability and economic efficiency.
Features 10 times overload protection 20:1 force measuring range Nominal forces 50, 125, 250, 500 and 1000 N Stainless steel sensor, Aluminum Cover
Advantages No re-calibration required Accuracy class 0.5% Covers a wide application range
LMGZ Force Measuring Bearing The LMGZ series tension sensors offer the highest accuracy, reliability, and durability in the industry. The ultra flat sensor can be used in the most stringent space conditions.
Features 20 times overload protection Accuracy class 0.3%
50:1 force measuring range Stainless steel construction
Advantages Recalibration is not required Wide measuring capability
at high resolution Wide measuring capability Corrosion resistant
LMGZ.D Double Range Force Measuring Bearing The LMGZ.D double range force
measuring bearing sensors offer
the highest accuracy, reliability, and
durability in the industry. Especially
when processing widest kinds and
widths of materials.
Features Measurable tension range 1:200
Overload protection 10 times the rated high the nominal force Nominal forces from 33N-6000N
Stainless steel sensor
Advantages Widest measuring range available at high resolution Recalibration is not required
Sizes available for every application Corrosion resistant
ZMGZ Force Measuring Journal The ZMGZ series force measuring journals are used to measure the tension in continuous material processing. Force measuring journals are utilized with rollers that have an internal bearing. A bearing mounts to the bearing seat of the load cell and fits inside the roller.
Features 10 times overload protection 20:1 force measuring range Nominal forces from 100-3000N
Stainless steel sensor
Advantages No recalibration required Wide measuring capability Sizes available for every application Corrosion resistant, ultra durable
AMGZ Series Force Measuring Journal with Dead Shaft Adapter The AMGZ Series sensors are
designed as dead shaft sensors to
allow easy roller change in continuous
material processing applications.
Features 10 times overload protection 20:1 force measuring range Nominal forces from 100 – 2250 N Stainless steel sensor, single bolt mounting
Advantages No recalibration required Wide measuring capability Sizes available for every application Corrosion resistant, ultra-durable, user friendly
UMGZ Force Measuring Bearing Block The UMGZ force measuring blocks are ruggedly constructed, accurate and very reliable. They are used in normal and dry ambient conditions.
Features Overload protection, 10-times nominal measuring force Nominal forces of 0,5-100 kN Stainless steel force sensors
Advantages No recalibration required
Nominal forces suitable for all uses Permanently corrosion-resistant
SMGZ Force Measuring Bearing Block SMGZ force sensors
are used in difficult ambient
conditions, e.g. hydrocarbon media like, rolling
oils or in high temperatures environments. They
can be used in virtually any metal strip
process.
Features Overload protection, 10-times nominal measuring force Nominal forces of 2-100 kN Stainless steel force sensors Protection class IP67
Advantages No recalibration required
Nominal forces suitable for all uses Permanently corrosion-resistant High level of operational safety
PMGZ Force Measuring Bearing Block These force sensors
are perfect for difficult ambient
conditions, e.g. cooling water,
wet paperpulp, high temperatures, humidity, acids and bases. They can be used in
virtually any wet environment.
Features Overload protection, 10-times nominal measuring force Nominal forces of 2-100 kN Stainless steel force sensors High temoerature up to 120°C
Advantages No recalibration required
Nominal forces suitable for all uses Permanently corrosion-resistant Large application range
IMGZ Series Force Measuring Roller The measuring
sensors are integrated in the roller
and measure the forces which are
acting on the roller in an accuratly and effective manner.
Features 10 times overload protection 50:1 force measuring range Nominal forces from 200 to 12000N
Stainless steel sensor Sensor integrated in roller with only one electrical connection
Advantages Recalibration is not required Wide measuring capability Sizes available for every application Corrosion resistant, ultra-durable Easy mounting and connection
RMGZ900 Force Measuring Roller The RMGZ900 series force
measuring rollers are designed as
self contained cantilever mount
sensors that minimise machine
space requirements in continuous
material processing applications.
Features 10 times overload protection 50:1 force measuring range Parallel plane / double flexion beam design Stainless steel sensor, anodised roller Roller length up to 800mm
Advantages Recalibration is not required Wide measuring capability Material position and measurement consistent Corrosion resistant, ultra-durable
RMGZ900mini Force Measuring Roller The RMGZ900mini series sensors
are designed as self contained
cantilever mount sensors that
minimise machine space
requirements in narrow material
processing applications.
Features 10 times overload protection 50:1 force measuring range Parallel plane / double flexion beam design Stainless steel sensor, anodised roller Roller length up to 100mm
Advantages Recalibration is not required Wide measuring capability Material position and measurement consistent Corrosion resistant, ultra-durable
RMGZ100 Force Measuring Roller FMS force measuring rollers of the RMGZ100 series are used to measure the tension in ropes, cables, wires and narrow web materials.
Features 10 times overload protection 20:1 force measuring range Nominal forces from 3-300 N Lifetime lubricated ball bearings
Advantages No recalibration required Wide measuring capability Size available for every application No maintenance necessary
RMGZ400/500 Force Measuring Roller FMS force measuring rollers of the RMGZ400/500 series are used to measure the tension in ropes, cables, wires and narrow web materials.
Features Nominal forces from 60-4000 N 10 times overload protection 50:1 force measuring range Lifetime lubricated ball bearings
Advantages Wide material processing range Recalibration is not required Wide measuring capability No maintenance necessary
RMGZ800 Force Measuring Roller FMS force measuring rollers of the RMGZ800 series are used to measure the tension in ropes, cables, wires and narrow web materials - made for higher forces and stability
Features Medium to high tension force (100-8000 N) 10 times overload protection 50:1 force measuring range Lifetime lubricated ball bearings
Advantages Wide material processing range
Recalibration is not required Wide measuring capability No maintenance necessary
