To suggest a specific offer, we need some information about your application. Please complete the data sheet as much as possible and send it to us. Thank you.

Customer: Project: Type of force sensor: Total material tension max:   min: [N]     or material tension per mm: [N/mm]     and material width: [mm] Roller weight: [kg] Journal diameter of roller: [mm]     or with inside bearing, roller diameter: [mm] Speed of roller: [1/min]     and roller diameter: [mm] Process speed: [m/min] Expected bearing lifetime: [h] Special types (depending on force sensor type): Covered bored through on both sides (H13) right-angle plug (H14) 90° offset connection plug (H15) Temperatures up to 150°C (H16) Straight, waterproof plug (H18) Grease nipple in cover (H19) Area of application: aggressive aqueous media (H29) Area of application: hydrocarbon media (H30) α1: [ ° ] α2: [ ° ] * In this example is α1 = 160°, α2 = 280° * Angles are measured counterclockwise starting at 0° * Angle convention is the same as used in the FMS-calculator

Contact information Company name: Name: Address: City, state: Postcode: Country: Telephone: Fax: E-mail:

Comments

If necessary we request you to send us a draft of your application by fax to: +41 44 850 60 06 (for FMS USA: 847 392 7873) Print this page send to FMS Switzerland send to FMS USA