LMGZ – Highly precise, stainless steel force measuring bearing

LMGZ
Features
  • Measuring range 50:1, accuracy class 0.3%
  • 7 sizes with nominal force from 33 to 25000 N (7.5 to 5620 lbf)
  • Overload protection up to 20-times nominal force, full stainless steel

The force measuring bearings of the LMGZ-Series, designed for the measurement of tension on continuous material processing lines where live shaft idler rolls are utilized. The accuracy class of 0.3% and the measuring range of 50:1 allows reproducible, highly precise measurements throughout the industry. The mechanical overload protection of up to 20-times the nominal force provides unsurpassed robustness. With the superior performance of the LMGZ-Series, accurate tension readings are obtained even with low web wrap angles and high roll weights. For installations where a Pillow Block mount is required the optional bracket can be utilized.

General technical details

Sensitivity1,8 mV/V
Tolerance of sensitivity<± 0,2 %
Accuracy class± 0,3 %
Measuring range50:1
Overload protection rating20 times nominal force
Power supply1 to 7 VDC
Temperature range-10 to 60 °C (14 to 140 F)
Input resistance350 Ω

Available sizes

SizesNominal forcesShaft diameterCAD dataWatchlist
200 33 N 9
200 50 N 9
200 100 N 9
201 50 N 12
201 125 N 12
201 250 N 12
201 500 N 12
203 50 N 17
203 125 N 17
203 250 N 17
203 500 N 17
203 750 N 17
203 1000 N 17
205.20 125 N 20
205.20 200 N 20
205.20 375 N 20
205.20 500 N 20
205.20 750 N 20
205.20 500 N 20
205.20 1500 N 20
205.20 2000 N 20
205.25 125 N 25
205.25 200 N 25
205.25 375 N 25
205.25 750 N 25
205.25 1500 N 25
307.35 375 N 35
307.35 750 N 35
307.35 1500 N 35
307.35 3000 N 35
307.35 600 N 35
307.40 375 N 40
307.40 750 N 40
307.40 1500 N 40
307.40 3000 N 40
307.40 2000 N 40
310.50 375 N 50
310.50 750 N 50
310.50 1500 N 50
310.50 3000 N 50
310.50 6000 N 50
310.50 12000 N 50
310.60 375 N 60
310.60 750 N 60
310.60 1500 N 60
310.60 3000 N 60
310.60 6000 N 60
310.60 12000 N 60
310.60 2000 N 60
313.65 2500 N 65
313.65 5000 N 65
313.65 10000 N 65
313.65 25000 N 65
313.80 2500 N 80
313.80 5000 N 80
313.80 10000 N 80
313.80 25000 N 80

Available options

NameDescriptionPicture
H13open covers for both sides, additional scope of supply 1 pcs. V-ringH13
H14right-angle connector in scope of supply, replaces straight connectorH14
H15connector offset 90°,red point on connector sideH15
H16temperature range up to 120°C (248°F)H16
H18with water tight, straight connector, replaces original conectorH18
H19grease nippleH19
H21elctrical connection with PG gland with 5 m (16 ft.) cable, replaces connectorH21
H29H29 - for aggressive media (acids)H29
H30H30 - for aggressive media (sovents, hydrocarbons), silicone freeH30
H31for vacuum applications to 1E-7 hPa , 1E-5 Torr, temperature range up to 120°C (248°F)H31
Jump to content