CA – Compact force sensors with flexible installation options for use with dead shaft rolls

CA
Features
  • Compact dimensions and various installation options
  • Nominal force ratings from 50 N (11lbf) to 1500 N (330 lbf)
  • Options include high temperature and vacuum chamber (to 10-7 hPa) construction
  • Measuring range 20:1, accuracy class ±0.5%
  • Overload protection rating of 10-times nominal force, stainless steel sensor body

The CA-Series force measuring sensor offers compact dimensions and flexible installation options, and is designed for the measurement of tension on continuous material processing lines where dead shaft idler rolls are utilized. The product can be supplied with a Pilot or without a Pilot at the back the unit. In addition, flexible mounting options include the ability to install the unit utilizing either four fasteners from the front or a single fastener from the rear. The included dowel pin can also be incorporated between force measuring bearing and the machine frame to ensure proper unit orientation. For installations where a Pillow Block mount is required the optional bracket can be utilized. Adapter diameters are available in various dimension, in metric as well as in imperial sizes.

General technical details

Sensitivity1,8 mV/V
Tolerance of sensitivity<± 2 %
Accuracy class± 0,5 %
Measuring range20:1
Overload protection rating10 times nominal force
Power supply1 to 12 VDC
Temperature range-10 to 60 °C (14 to 140 F)
Input resistance350 Ω

Available sizes

SizesNominal forcesShaft diameterCAD dataWatchlist
203 1500 N 17 mm
203 50 N 17 mm
203 125 N 17 mm
203 250 N 17 mm
203 500 N 17 mm
203 1000 N 17 mm

Available options

NameDescriptionPicture
FLflat face of force sensor, without shoulder, single screw mount, with dowel pinFL
DI125 Adapteradapter for 1.25 in. dead shaftDI125 Adapter
DI150 Adapteradapter for 1.5 in. dead shaftDI150 Adapter
DM25 Adapteradapter for 25 mm dead shaftDM25 Adapter
DM30 Adapteradapter for 30 mm dead shaftDM30 Adapter
DM40 Adapteradapter for 40 mm dead shaftDM40 Adapter
PHFlange mount with 4 screws, pilot hole for centeringPH
DI100 Adapteradapter for 1.00 in. dead shaftDI100 Adapter
H14right-angle connector in scope of supply, replaces straight connectorH14
H16temperature range up to 120°C (248°F)H16
H21electrical connection with PG gland with 5 m (16 ft.) cable, replaces connectorH21
H31for vacuum applications to 1E-7 hPa , 1E-5 Torr, temperature range up to 120°C (248°F)H31
Jump to content