FA – Ultra-flat, stainless steel force sensor for use with dead shaft rolls

  • Extremely flat design
  • Measuring range 20:1, accuracy class 0.5%
  • Nominal forces from 50 to 500 N (11 to 112 lbf)
  • Measuring body from stainless steel

The force sensors of the FA-Series feature an extremely slim design. The dead shaft adapter allows for a quick exchange for the roll and the bearings. The installation on the machine is simply realized with two shoulder bolts. Adapter diameters are available in various dimension, in metric as well as in imperial sizes.

General technical details

Sensitivity1,8 mV/V
Tolerance of sensitivity<± 2 %
Accuracy class± 0,5 %
Measuring range30:1
Overload protection rating10 times nominal force
Power supply1 to 12 VDC
Temperature range-10 to 60 °C (14 to 140 F)
Input resistance350 Ω

Available sizes

SizesNominal forcesShaft diameterCAD dataWatchlist
202 50 N
202 125 N
202 250 N
202 500 N

Available options

DI075 Adapteradapter for 0.75 in. dead shaftDI075 Adapter
DI100 Adapteradapter for 1.00 in. dead shaftDI100 Adapter
DM20 Adapteradapter for 20 mm shaftDM20 Adapter
DM25 Adapteradapter for 25 mm dead shaftDM25 Adapter
Jump to content