UMGZ – Standard force measuring block

UMGZ
Features
  • Overload protection up to 20-times nominal force, measuring body from stainless steel
  • 8 sizes with nominal force from 0.5 to 100 kN (112 to 22'500 lbf)
  • Measuring range 20:1, accuracy class 0.5 %

The force sensors of the UMGZ-Series, designed for the measurement of material tension on continous processing lines, are used in combination with standard pillow blocks. Block mounting is simple utilizing four fasteners into the bottom surface. force measuring blocks of the UMGZ-Series feature longevity, precision and reliability. The UMGZ-Series is available in two versions, horizontal and vertical, and thus can be specified for use in any mounting orientation and strip wrap configuration. With the superior performance of the UMGZ-Series, accurate tension readings are obtained even with low web wrap angles and high roll weights.

General technical details

Sensitivity1,8 mV/V
Tolerance of sensitivity<± 0,2 %
Accuracy class± 0,5 %
Measuring range20:1
Overload protection rating10 times nominal force
Power supply1 to 7 VDC
Temperature range-10 to 55 °C (14 to 130 F)
Input resistance350 Ω

Available sizes

SizesNominal forcesShaft diameterCAD dataWatchlist
060 250 N 12 to 25 mm
060 500 N 12 to 25 mm
060 1000 N 12 to 25 mm
060 2000 N 12 to 25 mm
080 250 N 30 to 40 mm
080 500 N 30 to 40 mm
080 1000 N 30 to 40 mm
080 2000 N 30 to 40 mm
080 5000 N 30 to 40 mm
100 10000 N 20 to 50 mm
100 500 N 20 to 50 mm
100 1000 N 20 to 50 mm
100 2000 N 20 to 50 mm
100 5000 N 20 to 50 mm
100 20000 N 20 to 50 mm
100 250 N 20 to 50 mm
200 10000 N 40 to 85 mm
200 2000 N 40 to 85 mm
200 5000 N 40 to 85 mm
200 20000 N 40 to 85 mm
200 30000 N 40 to 85 mm
200 40000 N 40 to 85 mm
200 12000 N 40 to 85 mm
200 15000 N 40 to 85 mm
200 50000 N 40 to 85 mm
200 8000 N 40 to 85 mm
300 10000 N 75 t o100 mm
300 5000 N 75 t o100 mm
300 20000 N 75 t o100 mm
300 50000 N 75 t o100 mm
400.350 10000 N 85 to 120 mm
400.350 20000 N 85 to 120 mm
400.350 50000 N 85 to 120 mm
400.350 100000 N 85 to 120 mm
400.390 10000 N 85 to 120 mm
400.390 20000 N 85 to 120 mm
400.390 50000 N 85 to 120 mm
400.390 100000 N 85 to 120 mm
500 10000 N 85 to 120 mm
500 20000 N 85 to 120 mm
500 50000 N 85 to 120 mm
500 100000 N 85 to 120 mm

Available options

NameDescriptionPicture
HHorizontal measuring direction, appr. ±60 deg. from the horizonalH
Vvertical measuring directionV
Oelectrical connection East in direction of the moving web / stripO
Welectrical connection West in direction of the moving web / stripW
H14right-angle connector in scope of supply, replaces straight connectorH14
H16temperature range up to 120°C (248°F)H16
H21electrical connection with PG gland with 5 m (16 ft.) cable, replaces connectorH21
Jump to content