ZMGZ – Force sensor rolls without shaft

ZMGZ
Features
  • Nominal force ratings from 50 N (11lbf) to 1500 N (330 lbf.)
  • 25 or 35 mm shaft journal for standard bearings
  • Options include high temperature and vacuum chamber (to 1E-7 hPa) construction
  • Measuring range 30:1, accuracy class ±0.5%

The ZMGZ-Series force sensor offers flexible installation options, and are designed for the measurement of tension on continuous material processing lines where idler rolls with integrated bearings without shaft are utilized. The product is available in two sizes. The shaft journals of 25 or 35 mm diameter accept standard bearings.

General technical details

Sensitivity1,8 mV/V
Tolerance of sensitivity<± 0,2 %
Accuracy class± 0,5 %
Temperature coefficient± 0,1 %/10K
Temperature range-10 to 60 °C (14 to 140 F)
Input resistance350 Ω
Power supply1 to 10 VDC
Overload protection rating10 times nominal force
Material main bodyStainless steel
Protection classIP 42
Electrical connectionMale flange connector, Amphenol, 4-pole
Repeatability error0.05%
Measuring range30:1

Available sizes

SizesNominal forces in N Shaft diameter CAD dataWatchlist
ZMGZ205100, 200, 375, 750, 150025 mm
ZMGZ307100, 200, 375, 750, 1500, 300035 mm

Available options

SizesOptionDescriptionCAD dataWatchlist

Option descriptions

NameDescriptionPicture
H14right-angle connector in scope of supply, replaces straight connectorH14H14
H16temperature range up to 120°C (248°F)H16H16
H18with water tight, straight connector, replaces original connectorH18H18
H21electrical connection with PG gland with 5 m (16 ft.) cable, replaces connectorH21H21
H28red point offset 180°H28H28
H29resistant against aggressive media, especially acids (please specify), up to 120°C (248°F)H29H29
H30resistant against aggressive media, especially hydrocarbons (please specify) up to 120°C (248°F)H30H30
H31for vacuum applications to 1E-7 hPa , 1E-5 Torr, temperature range up to 120°C (248°F)H31H31
Jump to content
Call support  (+41 44 852 80 80)
Contact expert