IMGZ035 – intergrated force measuring Roller

IMGZ035
Features
  • 10-times overload protection
  • Nominal forces from 200 to 3000 N, 30:1 force measuring range
  • Stainless steel sensor
  • Sensor integrated in roller with only one electrical connection

The force measuring rollers of the IMGZ035-series combine force sensor and roll. The IMGZ035-series design, incorporating dual bending beams, eliminates the load-specific influences of torque and ensures accurate measurement at any position on the roll while maintaining the parallel position of the material and eliminating angular deflection. The movement of the bending beams is detected by a set of strain gages arranged in a full bridge circuit. The resulting electrical signal, which is proportional to the applied force, is then amplified for use in monitoring or controlling web tension. With the superior performance of the RMGZ900-Series, accurate tension readings are obtained even with low web wrap angles and low material tension.

General technical details

Sensitivity1,8 mV/V
Tolerance of sensitivity<± 0,2 %
Accuracy class± 0,5 %
Temperature coefficient± 0,1 %/10K
Temperature range-10 to 60 °C (14 to 140 F)
Input resistance175 Ω
Power supply1 to 8.5 VDC
Overload protection rating10 times nominal force
Material main bodyStainless steel
Protection classIP 42
Electrical connectionPG-gland, open cable ends
Repeatability error0.05%
Measuring range30:1

Available sizes

SizesNominal forces in NCAD dataWatchlist
IMGZ035-400-080200, 400, 750, 1500, 3000
IMGZ035-500-080200, 400, 750, 1500, 3000
IMGZ035-600-080200, 400, 750, 1500, 3000
IMGZ035-700-080200, 400, 750, 1500, 3000
IMGZ035-1000-100200, 400, 750, 1500, 3000
IMGZ035-1200-100200, 400, 750, 1500, 3000
IMGZ035-1800-140200, 400, 750, 1500, 3000
IMGZ035-2000-160200, 400, 750, 1500, 3000
IMGZ035-2100-200200, 400, 750, 1500, 3000
IMGZ035-3000-200200, 400, 750, 1500, 3000
Jump to content