RMGZ200 – Compact force sensor for stranding machines with low wire tension

  • Special design for rotating applications:
  • Integrated Angle Adjustment Mechanism:
  • Nominal forces from 10 to 200 N (2.25 to 45 lbf)

Designed to meet the requirements of smaller and higher-revolution planetary and tubular type stranders, the force sensor of the RMGZ200-Series is also applicable to bunchers and twisters. The innovative dual flexion beam construction provides the foundation for accurate and reproducible measurements in difficult operating conditions. Once the load rating and housing configuration are properly specified for the application, the sensor is easily mounted to the machine with two fasteners. A single cable (power in / signal out) is connected at the sensor housing. Standard pulleys are not supplied by FMS.

General technical details

Sensitivity1,8 mV/V
Tolerance of sensitivity<± 0,2 %
Accuracy class± 0,5 %
Measuring range20:1
Overload protection rating10 times nominal force
Power supply1 to 12 VDC
Temperature range-10 to 60 °C (14 to 140 F)
Input resistance350 Ω

Available sizes

SizesNominal forcesbeaering seat for pulleyCAD dataWatchlist
200 20 N 42
200 50 N 42
200 100 N 42
200 200 N 42
200 10 N 42

Available options

H15red point offset 180°H15
H25Connector offset 180°H25
H15connector offset 90°, red point on connector sideH15
Jump to content