RMGZ100 – Compact force sensor for pulley

  • Overload protection up to 10 x nominal force
  • Measuring range 20:1, accuracy class 0.5 %
  • Nominal forces from 6 to 300 N (1.4 to 67 lbf)

The RMGZ100-Series force sensor is designed for the measurement of tension on continuous material processing lines for filament materials. A large variety of standard pulleys can be mounted on the supplied 19mm ball bearings. The installation of the force sensor to the machine frame is realized by means of a universal flange and included bracket. The force sensors of the RMGZ100-Series can be used in static applications as well as for measurements in rotating applications (planetary or tubular stranders, bunchers, twisters, etc.). The special design of the sensor body will in this case compensate for centrifugal and Coriolis forces. Standard pulleys are not supplied by FMS.

General technical details

Sensitivity1,8 mV/V
Tolerance of sensitivity<± 0,2 %
Accuracy class± 0,5 %
Measuring range20:1
Overload protection rating10 times nominal force
Power supply1 to 12 VDC
Temperature range-10 to 60 °C (14 to 140 F)
Input resistance350 Ω

Available sizes

SizesNominal forcesbeaering seat for pulleyCAD dataWatchlist
100 6 N 19
100 10 N 19
100 20 N 19
100 50 N 19
100 200 N 19
100 100 N 19
100 300 N 19

Available options

H14right-angle connector in scope of supply, replaces straight connectorH14
H16temperature range up to 120°C (248°F)H16
Jump to content