RMGZ400 – Medium size force sensor for pulley

RMGZ400
Features
  • Nominal forces from 60 to 500 N (13 to 110 lbf)
  • Overload protection up to 10 x nominal force
  • Measuring range 20:1, accuracy class 0.5 %

The force sensors of the RMGZ400-Series are used for the tension measurement in filamentary material. A large variety of standard pulleys can be mounted on the rotating flange. The installation of the force sensor to the machine frame is realized by means of a bore with keyway. The force sensors of the RMGZ400-Series can be used in static applications as well as for measurements in rotating applications (planetary or tubular stranders, bunchers, twisters, etc.). Standard pulleys are not supplied by FMS.

General technical details

Sensitivity1,8 mV/V
Tolerance of sensitivity<± 0,2 %
Accuracy class± 0,5 %
Measuring range20:1
Overload protection rating10 times nominal force
Power supply1 to 8.5 VDC
Temperature range-10 to 60 °C (14 to 140 F)
Input resistance350 Ω

Available sizes

SizesNominal forcesbeaering seat for pulleyCAD dataWatchlist
400 60 N 85
400 100 N 85
400 200 N 85
400 500 N 85

Available options

NameDescriptionPicture
H14right-angle connector in scope of supply, replaces straight connectorH14
H16temperature range up to 120°C (248°F)H16
H18with water tight, straight connector, replaces original connectorH18
Jump to content