RMGZ600 – Large size force sensor for pulley

RMGZ600
Features
  • Nominal forces from 1000 to 4000 N (220 to 880 lbf)
  • Overload protection up to 10 x nominal force
  • Measuring range 20:1, accuracy class 0.5 %

The force sensors of the RMGZ600-Series are used for the tension measurement in filamentary material. A large variety of standard pulleys can be mounted on the rotating flange. The installation of the force sensor to the machine frame is realized by means of a bore with keyway. The force sensors of the RMGZ400-Series can be used in static applications as well as for measurements in rotating applications (planetary or tubular stranders, bunchers, twisters, etc.). A pulley is not included in the scope of supply.

General technical details

Sensitivity1,8 mV/V
Tolerance of sensitivity<± 0,2 %
Accuracy class± 0,5 %
Measuring range20:1
Overload protection rating10 times nominal force
Power supply1 to 8.5 VDC
Temperature range-10 to 60 °C (14 to 140 F)
Input resistance350 Ω

Available sizes

SizesNominal forcesbeaering seat for pulleyCAD dataWatchlist
600 1000 N 85
600 2000 N 85
600 4000 N 85

Available options

NameDescriptionPicture
H14right-angle connector in scope of supply, replaces straight connectorH14
H16temperature range up to 120°C (248°F)H16
H18with water tight, straight connector, replaces original connectorH18
Jump to content