RMGZ800 – Heavy duty force sensor for pulley

  • Nominal forces from 100 to 8000 N (22 to 1760 lbf)
  • Overload protection up to 10 x nominal force
  • Measuring range 20:1, accuracy class 0.5 %

The force sensors of the RMGZ800-Series are used for the tension measurement in filamentary material. A large variety of standard pulleys can be mounted on the rotating flange. The installation of the force sensor to the machine frame is realized by means of a bore with keyway. The force sensors of the RMGZ800-Series can be used in static applications as well as for measurements in rotating applications (planetary or tubular stranders, bunchers, twisters, etc.). Standard pulleys are not supplied by FMS.

General technical details

Sensitivity1,8 mV/V
Tolerance of sensitivity<± 0,2 %
Accuracy class± 0,5 %
Measuring range20:1
Overload protection rating10 times nominal force
Power supply1 to 7 VDC
Temperature range-10 to 60 °C (14 to 140 F)
Input resistance350 Ω

Available sizes

SizesNominal forcesbeaering seat for pulleyCAD dataWatchlist
800 100 N 125
800 200 N 125
800 500 N 125
800 1000 N 125
800 2000 N 125
800 4000 N 125
800 6000 N 125
800 8000 N 125

Available options

H14right-angle connector in scope of supply, replaces straight connectorH14
H16temperature range up to 120°C (248°F)H16
H18with water tight, straight connector, replaces original connectorH18
H29resistant against aggressive media, especially acids (please specify), up to 120°C (248°F)H29
Jump to content