BKS020 – Compact steering frame for small to medium web widths

BKS020
Features
  • Wide range of options and accessries
  • Flexible installation options of the steering frame

The FMS web guide is mounted as close as possible to the location where the positional accuracy is required. With an FMS-webMASTER, the length of the steering frame (L) should be the same as the maximum material width (Mmax). For optimal control, the web guide sensor is mounted as close as possible to the outfeed of the steering frame. With an FMS-webDIRECTOR the guiding of the material will take place over a virtual turning point in the infeed run of the steering frame.

General technical details

Drive trainSupport, guidingElectrical connectionAdjustment speed
Stepper motor 24V, 2.5A with backlash-free ball screw3-point guide24 VDC power supply via terminal blocks35 mm/s

Technical details

PictureDesignationRoller length Roller diameterRoller surfaceFrame widthMax. displacementCAD dataWatchlist
0250.0280.050BKS020
0250.0280.050
250 mm 50 mm D Aluminium, machined, N7, Ra 1.6 280 mm ± 15 mm
0300.0290.050BKS020
0300.0290.050
300 mm 50 mm D Aluminium, machined, N7, Ra 1.6 290 mm ± 25 mm
0400.0320.075BKS020
0400.0320.075
400 mm 75 mm D Aluminium, machined, N7, Ra 1.6 320 mm ± 25 mm
0500.0405.075BKS020
0500.0405.075
500 mm 75 mm D Aluminium, machined, N7, Ra 1.6 405 mm ± 25 mm
0600.0455.075BKS020
0600.0455.075
600 mm 75 mm D Aluminium, machined, N7, Ra 1.6 455 mm ± 25 mm
0300.0290.075BKS020
0300.0290.075
300 mm 75 mm D Aluminium, machined, N7, Ra 1.6 290 mm ± 25 mm
0400.0320.050BKS020
0400.0320.050
400 mm 50 mm D Aluminium, machined, N7, Ra 1.6 320 mm ± 25 mm
Jump to content