RMGZ400 – Medium size force sensor for pulley

RMGZ4
Features
  • Nominal forces from 60 to 1000 N (13 to 220 lbf.)
  • Overload protection up to 10-times nominal force
  • Measuring range 30:1, accuracy class ±0.5 %

The force sensors of the RMGZ400-Series are used for the tension measurement in filamentary material. A large variety of standard pulleys can be mounted on the rotating flange. The installation of the force sensor to the machine frame is realized by means of a bore with keyway. The force sensors of the RMGZ400-Series can be used in static applications as well as for measurements in rotating applications (planetary or tubular stranders, bunchers, twisters, etc.). Standard pulleys are not supplied by FMS.

General technical details

Sensitivity1,8 mV/V
Tolerance of sensitivity<± 0,2 %
Accuracy class± 0,5 %
Temperature coefficient± 0,1 %/10K
Temperature range-10 to 60 °C (14 to 140 F)
Input resistance350 Ω
Power supply1 to 8.5 VDC
Overload protection rating10 times nominal force
Material main bodySteel
Protection classIP 40
Electrical connectionMale receptacle, flange mounting M14x1, 5-pole
Repeatability error0.05%
Measuring range30:1

Available sizes

SizesNominal forces in N Inner-ø pulley CAD dataWatchlist
RMGZ400C60, 100, 200, 500, 100085 mm

Available options

SizesOptionDescriptionCAD dataWatchlist
RMGZ400C  
H14
right-angle connector in scope of supply, replaces straight connector
H16
temperature range up to 120°C (248°F)
H18
with water tight, straight connector, replaces original connector

Option descriptions

NameDescriptionPicture
H14right-angle connector in scope of supply, replaces straight connectorH14H14
H16temperature range up to 120°C (248°F)H16H16
H18with water tight, straight connector, replaces original connectorH18H18
Jump to content