RMGZ600B00 – Large size force sensor for pulley - Phase-out 12/2019, 1000 N replaced by RMGZ400-Series, other FNom RMGZ800

  • Nominal forces from 1000 to 4000 N (220 to 880 lbf.)
  • Overload protection up to 10-times nominal force
  • Measuring range 30:1, accuracy class 0.5 %

The force sensors of the RMGZ600-Series are used for the tension measurement in filamentary material. A large variety of standard pulleys can be mounted on the rotating flange. The installation of the force sensor to the machine frame is realized by means of a bore with keyway. The force sensors of the RMGZ400-Series can be used in static applications as well as for measurements in rotating applications (planetary or tubular stranders, bunchers, twisters, etc.). A pulley is not included in the scope of supply.

General technical details

Sensitivity1,8 mV/V
Tolerance of sensitivity<± 0,2 %
Accuracy class± 0,5 %
Temperature coefficient± 0,1 %/10K
Temperature range-10 to 60 °C (14 to 140 F)
Input resistance350 Ω
Power supply1 to 10 VDC
Overload protection rating10 times nominal force
Material main bodySteel
Protection classIP 40
Electrical connectionMale connector M16x1.5, 5-pole
Repeatability error0.05%
Measuring range30:1

Available sizes

SizesNominal forces in N Inner-ø pulley CAD dataWatchlist

Available options

SizesOptionDescriptionCAD dataWatchlist
right-angle connector in scope of supply, replaces straight connector
temperature range up to 120°C (248°F)
with water tight, straight connector, replaces original connector

Option descriptions

H14right-angle connector in scope of supply, replaces straight connectorH14H14
H16temperature range up to 120°C (248°F)H16H16
H18with water tight, straight connector, replaces original connectorH18H18
Jump to content