RMGZ100B00 – Compact force sensor for pulley - Phased-out 03/2020, drop-in replacement RMGZ100C

RMGZ100B
Features
  • Overload protection up to 10-times nominal force, from stainless steel
  • Measuring range 30:1, accuracy class 0.5 %
  • Nominal forces from 6 to 300 N (1.4 to 67 lbf.)

The RMGZ100-Series force sensor is designed for the measurement of tension on continuous material processing lines for filament materials. A large variety of standard pulleys can be mounted on the supplied 19mm ball bearings. The installation of the force sensor to the machine frame is realized by means of a universal flange and included bracket. The force sensors of the RMGZ100-Series can be used in static applications as well as for measurements in rotating applications (planetary or tubular stranders, bunchers, twisters, etc.). The special design of the sensor body will in this case compensate for centrifugal and Coriolis forces. Standard pulleys are not supplied by FMS.

General technical details

Sensitivity1,8 mV/V
Tolerance of sensitivity<± 0,2 %
Accuracy class± 0,5 %
Temperature coefficient± 0,1 %/10K
Temperature range-10 to 60 °C (14 to 140 F)
Input resistance350 Ω
Power supply1 to 10 VDC
Overload protection rating10 times nominal force
Material main bodyStainless steel
Protection classIP 42
Electrical connectionMale receptacle, flange mounting M14x1, 5-pole
Repeatability error0.05%
Measuring range30:1

Available sizes

SizesNominal forces in N Inner-ø pulley CAD dataWatchlist

Available options

SizesOptionDescriptionCAD dataWatchlist

Option descriptions

NameDescriptionPicture
H14right-angle connector in scope of supply, replaces straight connectorH14H14
H16temperature range up to 120°C (248°F)H16H16
Jump to content