RMGZ200 – Compact force sensor for stranding machines with low wire tension

RMGZ2
Features
  • Special design for rotating applications
  • Integrated angle adjustment mechanism
  • Nominal forces from 10 to 200 N (2.25 to 45 lbf.)

Designed to meet the requirements of smaller and higher-revolution planetary and tubular type stranders, the force sensor of the RMGZ200-Series is also applicable to bunchers and twisters. The innovative dual flexion beam construction provides the foundation for accurate and reproducible measurements in difficult operating conditions. Once the load rating and housing configuration are properly specified for the application, the sensor is easily mounted to the machine with two fasteners. A single cable (power in / signal out) is connected at the sensor housing. Standard pulleys are not supplied by FMS.

General technical details

Sensitivity1,8 mV/V
Tolerance of sensitivity<± 0,2 %
Accuracy class± 0,5 %
Temperature coefficient± 0,1 %/10K
Temperature range-10 to 60 °C (14 to 140 F)
Input resistance350 Ω
Power supply1 to 10 VDC
Overload protection rating10 times nominal force
Material main bodyhigh-strength aluminum
Protection classIP 42
Electrical connectionMale connector M8, 4-pole
Repeatability error0.05%
Measuring range30:1

Available sizes

SizesNominal forces in N Inner-ø pulley CAD dataWatchlist
RMGZ200A10, 20, 50, 100, 20042 mm

Available options

SizesOptionDescriptionCAD dataWatchlist
RMGZ200A  
H25
connector offset 180°
H25.H28
combined options
H28
red point offset 180°

Option descriptions

NameDescriptionPicture
H25connector offset 180°H25H25
H25.H28combined options
H28red point offset 180°H28H28
Jump to content