CA – Compact force sensors with flexible installation options for use with dead shaft rolls

CA
Features
  • Compact dimensions and various installation options
  • Nominal force ratings from 50 to 1500 N (110 to 330 lbf.)
  • Options include high temperature and vacuum chamber (to 10-7 hPa) construction
  • Measuring range 30:1, accuracy class ±0.5%
  • Overload protection rating of 10-times nominal force, stainless steel sensor body

The CA-Series force measuring sensor offers compact dimensions and flexible installation options, and is designed for the measurement of tension on continuous material processing lines where dead shaft idler rolls are utilized. The product can be supplied with a Pilot or without a Pilot at the back the unit. In addition, flexible mounting options include the ability to install the unit utilizing either four fasteners from the front or a single fastener from the rear. The included dowel pin can also be incorporated between force measuring bearing and the machine frame to ensure proper unit orientation. For installations where a Pillow Block mount is required the optional bracket can be utilized. Adapter diameters are available in various dimension, in metric as well as in imperial sizes.

General technical details

Sensitivity1,8 mV/V
Tolerance of sensitivity<± 2 %
Accuracy class± 0,5 %
Temperature coefficient± 0,1 %/10K
Temperature range-10 to 60 °C (14 to 140 F)
Input resistance350 Ω
Power supply1 to 12 VDC
Overload protection rating10 times nominal force
Material main bodyStainless steel
Protection classIP 42
Electrical connectionMale receptacle, flange mounting M14x1, 5-pole
Repeatability error0.05%
Measuring range30:1

Available sizes

SizesNominal forces in N Shaft diameter CAD dataWatchlist
CA203-10050, 1000, 1500, 125, 250, 5001.00 in.
CA203-12550, 1000, 1500, 125, 250, 5001.25 in.
CA203-15050, 1000, 1500, 125, 250, 5001.50 in.
CA203-M2550, 1000, 1500, 125, 250, 50025 mm
CA203-M3050, 1000, 1500, 125, 250, 50030 mm
CA203-M4050, 1000, 1500, 125, 250, 50040 mm

Available options

SizesOptionDescription FO CAD dataWatchlist

Option descriptions

Name FO DescriptionPicture
FL
flat face of force sensor, without shoulder, single screw mount, with dowel pinFLFL
PH
Flange mount with 4 screws, pilot hole for centeringPHPH
H14
right-angle connector in scope of supply, replaces straight connectorH14H14
H16
temperature range up to 120°C (248°F)H16H16
H21
electrical connection with PG gland with 5 m (16 ft.) cable, replaces connectorH21H21
H31
for vacuum applications to 1E-7 hPa , 1E-5 Torr, temperature range up to 120°C (248°F)H31H31
H32
vacuum to 1E-7 hPa , 1E-5 Torr, up to 150°C (302°F), with pg-gland and 5 m (16 ft.) cableH32H32
H33
temperature range up to 150°C (302°F), with pg-gland and 5 m (16 ft.) cableH33H33
Jump to content