FA – Ultra-flat, stainless steel force sensor for use with dead shaft rolls

FA
Features
  • Extremely flat design
  • Measuring range 30:1, accuracy class ±0.5%
  • Nominal forces from 50 to 500 N (11 to 112 lbf.)
  • Measuring body from stainless steel

The force sensors of the FA-Series feature an extremely slim design. The dead shaft adapter allows for a quick exchange for the roll and the bearings. The installation on the machine is simply realized with two shoulder bolts. Adapter diameters are available in various dimension, in metric as well as in imperial sizes.

General technical details

Sensitivity1,8 mV/V
Tolerance of sensitivity<± 2 %
Accuracy class± 0,5 %
Temperature coefficient± 0,1 %/10K
Temperature range-10 to 60 °C (14 to 140 F)
Input resistance350 Ω
Power supply1 to 10 VDC
Overload protection rating10 times nominal force
Material main bodyStainless steel
Protection classIP 42
Electrical connectionMale connector M8, 4-pole
Repeatability error0.05%
Measuring range30:1

Available sizes

SizesNominal forces in N Shaft diameter CAD dataWatchlist
FA202-M2050, 125, 250, 50020 mm
FA202-M2550, 125, 250, 50025 mm
FA202-07550, 125, 250, 5000.75 in.
FA202-10050, 125, 250, 5001.00 in.
Jump to content