RMGZ9 – Freely configurable cantilever force measuring roller
- Nominal forces from 50 to 1000 N (11 to 220 lbf.)
- Overload protection up to 10-times nominal force, measuring body from stainless steel
- Measuring range 30:1, accuracy class ±0.5 %
The force measuring rollers of the RMGZ9-Series combine force sensor and roller. The RMGZ9-Series design, incorporating dual bending beams, eliminates the load-specific influences of torque and ensures accurate measurement at any position on the roller while maintaining the parallel position of the material and eliminating angular deflection. The movement of the bending beams is detected by a set of strain gages arranged in a full bridge circuit. The resulting electrical signal, which is proportional to the applied force, is then amplified for use in monitoring or controlling web tension. With the superior performance of the RMGZ9-Series, accurate tension readings are obtained even with low web wrap angles and low material tension.
General technical details
| Sensitivity | 1,8 mV/V |
|---|---|
| Tolerance of sensitivity | <± 0,2 % |
| Accuracy class | ± 0,5 % |
| Temperature coefficient | ± 0,1 %/10K |
| Temperature range | -10 to 60 °C (14 to 140 F) |
| Input resistance | 350 Ω |
| Power supply | 1 to 10 VDC |
| Overload protection rating | 10 times nominal force |
| Material main body | Stainless steel |
| Protection class | IP 42 |
| Electrical connection | Male flange connector, Amphenol, 4-pole |
| Repeatability error | 0.05% |
| Measuring range | 30:1 |
Available sizes
Option descriptions
| Name | FO | Description | Picture |
|---|---|---|---|
| H11 | small connector, round type C 091 |   | |
| H12 | axial electrical connection, repaces radial, small connector, round type C 091 |   | |
| H14 | right-angle connector in scope of supply, replaces straight connector |   | |
| H16 | temperature range up to 120°C (248°F) |   | |
| H18 | with water tight, straight connector, replaces original connector |   | |
| H21 | electrical connection with PG gland with 5 m (16 ft.) cable, replaces connector |   | |
| H27 | connector rotated 90° (red point on opposite side of connector) |   | |
| H31 | for vacuum applications to 1E-7 hPa , 1E-5 Torr, temperature range up to 120°C (248°F) |   | |
| D | material aluminum, Ra = 1.6 |   | |
| E | material aluminium, surface clear anodized | | |
| EB | material aluminum, suface anodized black | | |
| SS | stainless steel |
Your benefits
- For a wide range of applications
- Robust and durable
- Precise performance even at low tension values
Features
- Nominal forces from 50 to 1000 N (11 to 220 lbf.)
- Overload protection up to 10-times nominal force, measuring body from stainless steel
- Measuring range 30:1, accuracy class ±0.5 %
Industry
Converting, Textile, Narrow Web, Yarns and Fibres, Labels, Fabrics