BKS030 – Steering frame for medium web widths

BKS030
Features
  • Wide range of options and accessries
  • Flexible installation options of the steering frame

The FMS web guide is mounted as close as possible to the location where the positional accuracy is required. With an FMS-webMASTER, the length of the steering frame (L) should be the same as the maximum material width (Mmax). For optimal control, the web guide sensor is mounted as close as possible to the outfeed of the steering frame. With an FMS-webDIRECTOR the guiding of the material will take place over a virtual turning point in the infeed run of the steering frame.

General technical details

Drive trainSupport, guidingElectrical connectionAdjustment speed
Stepper motor 24V, 2.5A with backlash-free ball screw4-point guide35 mm/s

Technical details

PictureDesignationRoller length Roller diameterRoller surfaceFrame widthMax. displacementCAD dataWatchlist
0600.0450.100BKS030
0600.0450.100
600 mm 100 mm D Aluminium, machined, N7, Ra 1.6 450 mm ± 22.5 mm
0800.0600.100BKS030
0800.0600.100
800 mm 100 mm D Aluminium, machined, N7, Ra 1.6 600 mm ± 30 mm
1000.0750.100BKS030
1000.0750.100
1000 mm 100 mm D Aluminium, machined, N7, Ra 1.6 750 mm ± 37.5 mm
1000.0750.150BKS030
1000.0750.150
1000 mm 150 mm D Aluminium, machined, N7, Ra 1.6 750 mm ± 37.5 mm
1200.0900.150BKS030
1200.0900.150
1200 mm 150 mm D Aluminium, machined, N7, Ra 1.6 900 mm ± 45 mm
1200.0900.100BKS030
1200.0900.100
1200 mm 100 mm D Aluminium, machined, N7, Ra 1.6 900 mm ± 45 mm
1400.1000.100BKS030
1400.1000.100
1400 mm 100 mm D Aluminium, machined, N7, Ra 1.6 1000 mm ± 50 mm
1400.1000.150BKS030
1400.1000.150
1400 mm 150 mm D Aluminium, machined, N7, Ra 1.6 1000 mm ± 50 mm
1600.1200.150BKS030
1600.1200.150
1600 mm 150 mm D Aluminium, machined, N7, Ra 1.6 1200 mm ± 60 mm
1800.1200.150BKS030
1800.1200.150
1800 mm 150 mm D Aluminium, machined, N7, Ra 1.6 1200 mm ± 60 mm
Jump to content