F – Ultra-flat, stainless steel force measuring bearing

F
Features
  • Extremely flat design
  • Measuring range 30:1, accuracy class 0.5%
  • Nominal forces from 50 to 500 N (11 to 112 lbf.)
  • Measuring body from stainless steel

The force measuring bearings of the F-Series feature an extremely slim design. They are designed for the measurement of tension on continuous material processing lines where live shaft idler rolls are utilized. The installation on the machine is simply realized with two shoulder bolts.

General technical details

Sensitivity1,8 mV/V
Tolerance of sensitivity<± 2 %
Accuracy class± 0,5 %
Temperature coefficient± 0,1 %/10K
Temperature range-10 to 60 °C (14 to 140 F)
Input resistance350 Ω
Power supply1 to 10 VDC
Overload protection rating10 times nominal force
Material main bodyStainless steel
Protection classIP 42
Electrical connectionMale connector M8, 4-pole
Repeatability error0.05%
Measuring range30:1

Available sizes

SizesNominal forces in N Shaft diameter CAD dataWatchlist
F20250, 125, 250, 50015 mm
Jump to content
Call support  (+41 44 852 80 80)
Contact expert