C – Compact force sensors with flexible installation options for use with live shaft rolls

  • Compact dimensions and various installation options
  • Nominal force ratings from 50 to 2000 N ( 11 to 440 lbf.)
  • Options include high temperature and vacuum chamber (to 10-7 hPa) construction
  • Measuring range 30:1, accuracy class ±0.5%
  • Overload protection rating of 10-times nominal force, stainless steel sensor body

The C-Series force measuring sensor offers compact dimensions and flexible installation options, and is designed for the measurement of tension on continuous material processing lines where live shaft idler rolls are utilized. The product can be supplied with a Pilot or without a Pilot at the back the unit. In addition, flexible mounting options include the ability to install the unit utilizing either four fasteners from the front or a single fastener from the rear. The included dowel pin can also be incorporated between force measuring bearing and the machine frame to ensure proper unit orientation. For installations where a Pillow Block mount is required the optional bracket can be utilized.

General technical details

Sensitivity1,8 mV/V
Tolerance of sensitivity<± 2 %
Accuracy class± 0,5 %
Temperature coefficient± 0,1 %/10K
Temperature range-10 to 60 °C (14 to 140 F)
Input resistance350 Ω
Power supply1 to 10 VDC
Overload protection rating10 times nominal force
Material main bodyStainless steel
Protection classIP 42
Electrical connectionMale connector M16x0.75, 5-pole
Repeatability error0.05%
Measuring range30:1

Available sizes

SizesNominal forces in N Shaft diameter CAD dataWatchlist
C20350, 125, 250, 500, 100017 mm
C205125, 200, 375, 750, 1500, 200025 mm
C2Z5125, 200, 375, 750, 1500, 20001 in.

Available options

SizesOptionDescription FO CAD dataWatchlist

Option descriptions

Name FO DescriptionPicture
flat face of force sensor, without shoulder, single screw mount, with dowel pinFLFL
Flange mount with 4 screws, pilot hole for centeringPHPH
right-angle connector in scope of supply, replaces straight connectorH14H14
temperature range up to 120°C (248°F)H16H16
electrical connection with PG gland with 5 m (16 ft.) cable, replaces connectorH21H21
for vacuum applications to 1E-7 hPa , 1E-5 Torr, temperature range up to 120°C (248°F)H31H31
vacuum to 1E-7 hPa , 1E-5 Torr, up to 150°C (302°F), with pg-gland and 5 m (16 ft.) cableH32H32
temperature range up to 150°C (302°F), with pg-gland and 5 m (16 ft.) cableH33H33
Jump to content
Call support  (+41 44 852 80 80)
Contact expert