LMGZ – Highly precise, stainless steel force measuring bearing

LMGZ
Features
  • Measuring range 100:1, accuracy class ±0.3%
  • 11 sizes with nominal force from 33 to 25000 N (7.5 to 5620 lbf.)
  • Overload protection up to 20-times nominal force, full stainless steel

The force measuring bearings of the LMGZ-Series, designed for the measurement of tension on continuous material processing lines where live shaft idler rolls are utilized. The accuracy class of 0.3% and the measuring range of 100:1 allows reproducible, highly precise measurements throughout the industry. The mechanical overload protection of up to 20-times the nominal force provides unsurpassed robustness. With the superior performance of the LMGZ-Series, accurate tension readings are obtained even with low web wrap angles and high roll weights. For installations where a Pillow Block mount is required the optional bracket can be utilized.

General technical details

Sensitivity1,8 mV/V
Tolerance of sensitivity<± 0,2 %
Accuracy class± 0,3 %
Temperature coefficient± 0,1 %/10K
Temperature range-10 to 60 °C (14 to 140 F)
Input resistance350 Ω
Power supply1 to 7 VDC
Overload protection rating20 times nominal force
Material main bodyStainless steel
Protection classIP 42
Electrical connectionMale flange connector, Amphenol, 4-pole
Repeatability error0.05%
Measuring range100:1

Available sizes

SizesNominal forces in N Shaft diameter CAD dataWatchlist
LMGZ20033, 50, 1009 mm
LMGZ20150, 125, 250, 50012 mm
LMGZ20350, 750, 1000, 125, 250, 50017 mm
LMGZ204125, 200, 375, 500, 750, 150020 mm
LMGZ205125, 200, 375, 500, 750, 150025 mm
LMGZ307375, 750, 1500, 300035 mm
LMGZ308375, 750, 1500, 2000, 300040 mm
LMGZ310375, 6000, 12000, 750, 1500, 300050 mm
LMGZ312375, 6000, 12000, 750, 1500, 300060 mm
LMGZ3132500, 5000, 10000, 2500065 mm
LMGZ3162500, 5000, 10000, 2500080 mm

Available options

SizesOptionDescriptionCAD dataWatchlist

Option descriptions

NameDescriptionPicture
H13open covers for both sides, additional scope of supply 1 pcs. V-ringH13H13
H14right-angle connector in scope of supply, replaces straight connectorH14H14
H15connector offset 90°, red point on connector sideH15H15
H16temperature range up to 120°C (248°F)H16H16
H18with water tight, straight connector, replaces original connectorH18H18
H19grease nippleH19H19
H21electrical connection with PG gland with 5 m (16 ft.) cable, replaces connectorH21H21
H29resistant against aggressive media, especially acids (please specify), up to 120°C (248°F)H29H29
H30resistant against aggressive media, especially hydrocarbons (please specify) up to 120°C (248°F)H30H30
H31for vacuum applications to 1E-7 hPa , 1E-5 Torr, temperature range up to 120°C (248°F)H31H31
H32vacuum to 1E-7 hPa , 1E-5 Torr, up to 150°C (302°F), with pg-gland and 5 m (16 ft.) cableH32H32
H33temperature range up to 150°C (302°F), with pg-gland and 5 m (16 ft.) cableH33H33
Jump to content